Ignition Distributor
Re-manufacturing
Ignition Distributors
Re-manufactured
Specializing in
Ignition Distributors for:
Agricultural, Industrial, Fork-Lifts, Trucks, Industrial
and Automobile Restoration
applications.
Doing distributor re-manufacturing on a
"Custom",
"Bench Work Only", basis
since 1948.
- Complete disassembly, clean up, inspection and stress relieving of
all components.
- Excessively worn, broken, or damaged parts are repaired or
replaced. Regrind of worn or
damaged cams where needed or requested.
- Parts corrosion inhibited using a proprietary process. Reduces or
eliminates future failures and reductions in performance due to rust and
corrosion.
- Cast iron bodied units are coated with a long lasting, tough
proprietary coating.
- Moving parts lubricated with synthetic, hi-temperature, extreme
pressure lubricants that stay fluid. Lubricants used will not turn to a
"wax-like" substance with time and heat exposure.
- Fasteners and fittings are replaced with stainless steel fittings
to further insure a long, trouble-free life.
- Ask us about conversion from points to electronic ignition
systems. They work well!
Call, write, or see our web site for more information. Request our data sheet with details of how we stay in the position being of "The Premier US Custom Re-manufacturer of Ignition Distributors". You can ship to us via UPS and we'll return the finished unit to you via UPS. We Accept Visa and Master Card. Our goal is to produce the finest re-manufactured distributors in use today. Buffalo Machine is a custom, one at a time, bench work only, re-manufacturing shop. Your distributors deserve, and get, our undivided, individual attention!
We guarantee the ignition
distributors we re-manufacture are
"Better Than
Original"! "Better
Built"! "Better
Lubricated"!
And "Better
Operating" Units! You can expect them to be
"Longer Lasting"
than the Original!
303-838-0372 or Toll Free 1-888-895-9904
www.BuffaloMachineWorks.com